> The female mini-plug marked "SUB RX" is for a 1/8" stereo > cable that goes into the back of a microHAM MK2R or MK2R+ for > subreceiver audio in.
It's also useful with microKEYER II which is dual channel. > I don' t know the answer to the Inhibit question, The female RCA was added to the ACC plug in the most recent revision of the cables so those who use Inhibit from an amplifier (Alpha or Acom "Key Out", etc), microHAM Station Master, inhibit from M2R/MK2R+, or an external sequencer do not need to modify the ACC plug to add and extra cable. If one us using an original microKEYER, a K3 without subreceiver, or not using any external hardware that might need to control the K3 inhibit line, both of the pigtails can be ignored. 73, ... Joe, W4TV > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Dick > Dievendorff > Sent: Monday, January 19, 2009 12:30 PM > To: 'Jay Rodaman'; [email protected] > Subject: Re: [Elecraft] Microkeyer > > > The female mini-plug marked "SUB RX" is for a 1/8" stereo > cable that goes into the back of a microHAM MK2R or MK2R+ for > subreceiver audio in. The 37-pin cable was full, so that > line was made separate. I don' t know the answer to the > Inhibit question, but I would recommend you ask on the microHAM forum. > > Dick, K6KR > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Jay Rodaman > Sent: Monday, January 19, 2009 8:09 AM > To: [email protected] > Subject: [Elecraft] Microkeyer > > Just setting up my new K3 with sub receiver. > I have the Original Microkeyer and got the matching cable set > for the K3 Question is: There are two connectors that I do > not know where to connect 1.RCA female marked "INHIBIT" 2. > Female mini-plug marked "SUB RX" Where do these go? Thanks > for any help Jay > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
