FOUND IT!!!! In order for the KRX3 to get its input from the ANT2 connector, the KRX3 input must come from the KAT3 **AND** one must set the KRX3 to ANT2 using the B_SET button.
Whew!!! Brian K1LI On Tue, Jan 20, 2009 at 10:46 PM, Brian Machesney <nekvts...@gmail.com>wrote: > Don, > > Thanks for the help, but I'm still not with you. I want to operate in SO2V > mode with the main and sub receivers on different bands using different > antennas connected to the ANT1 and ANT2 connectors. > > I have the TMP cable connected between the KAT3 and the KRX3 input. The TMP > cable from the Aux RF BNC connector is present but insulated, per the manual > instructions, so it is inactive. > > I want the input to the KRX3 to come from the ANT2 connector. What I need > to know is how to set the configuration options to make this happen. > Obviously, the KAT3 and KRX3 CONFIG menu options are set to something other > than "notInst." The only options for the KRX3 are "Ant-Atu" and "Ant=bnc." > So, if I have the KRX3 set to "Ant=bnc" and the KRX3 input coming from the > KAT3, I would expect the KRX3 input to come from the ANT2 connector - but it > doesn't; it still comes from the ANT1 connector. > > What am I missing? > > Brian K1LI >
_______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
