Do not be mislead by the manual as I was last weekend during the VHF contest.
The "LP" has nothing to do with low ***RF*** power. It is active when producing 100W or 0dBm in transverter mode. Currently there is no K3 keying output that is ONLY active when transverting. To achieve this I had to gate the KEYOUT-LP on pin 10 and the DIGOUT0 signal on pin 6 Perhaps it should have been labelled "LC" (low current)? Dave WW2R )> > Message: 2 > Date: Thu, 22 Jan 2009 12:15:33 -0500 > From: Don Wilhelm <[email protected]> > Subject: Re: [Elecraft] Silly question - what is KEY OUT? > To: "Darwin, Keith" <[email protected]> > Cc: [email protected] > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Kieth, > > From page 17 of the manual > > KEYOUT-LP at pin 10 of the ACC connector is similar, but the max voltage > is lower and it is limited to 10 ma. > > 73, > Don W3FPR _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
