Thanks for the explanation, I understand how it´s done, however I see it in a different way, sorry.
73 Jim SM2EKM ---------------------- Lyle Johnson wrote: >> Mic gain should NEVER have any influence on Vox gain. > > Mic Gain should always be adjusted to provide 4+ bars of "ALC" > indication on the K3. This indicates sufficient audio level for proper > operation of the transmitter, including VOX, CMP, AM modulation and FM > deviation among other things. > > The VOX system gets its audio signal after the Mic amplifier, so this > setting also normalizes the VOX system. Thus, one VOX setting is all > that is required no matter which audio source (FP MIC, RP MIC, LINE IN) > or microphone you are using. > > If VOX Gain was not taken after applying Mic Gain, you'd have to adjust > Mic Gain *and* VOX gain every time you used a different microphone or > other transmit audio source. We have many users who routinely use > different microphones on their K3s, so normalizing the VOX system gain > was a deliberate system design decision. > > 73, > > Lyle KK7P _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
