Julius, There is no one 'right way' - My opinion -- If you ever toggle the filters with the XFIL button, then having the filters in corresponding slots will be easier to remember - i.e, FL4 is the 400 Hz filter no matter whether the main or the sub.
If you only use the DSP controls (width and shift or HI and LO cut), then the DSP will figure it out and there is no need to mentally remember which filter is in which slot. 73, Don W3FPR Julius Fazekas wrote: > In preparation for installing the second Rx, I will have a wider selection of > filters for the main Rx versus the second Rx. Should the same filters be > placed in their corresponding slots on both? In my main, I'll have the 2.7, > 1.0, 500, 400 and 250. The second will have the 2.7 and 400 only at this time. > > Thanks, > Julius > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
