I'd recommend descending width, widest at FL1... I personally find it "tidier" to line things up. I'd put the 2.7 in FL1 and the 400 in FL4 in the sub if it were my radio. But you can just as easily put the 400 Hz filter in FL2 in the sub. As long as you set the filter configuration to match physical reality either should work fine.
There are fewer surprises due to missed configuration settings if FL1 contains a filter. After EE INIT (should you ever need to do this), the sub Rx will be configured for a 2.7 kHz filter at FL1. It might be comforting if that just works before you reconfigure filters after an EE INIT. Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Julius Fazekas Sent: Sunday, February 01, 2009 6:14 AM To: [email protected] Subject: [Elecraft] Second Rx Filters In preparation for installing the second Rx, I will have a wider selection of filters for the main Rx versus the second Rx. Should the same filters be placed in their corresponding slots on both? In my main, I'll have the 2.7, 1.0, 500, 400 and 250. The second will have the 2.7 and 400 only at this time. Thanks, Julius Julius Fazekas N2WN Tennessee Contest Group TnQP http://www.tnqp.org/ Elecraft K2/100 #4455 Elecraft K3/100 #366 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
