Hi all,
Just finished the control board and did the infamous resistance checks. All but
U6 pin 29 and 30 check out ok.
1) Pin 29..... 95.9 ohms with a radio shack multimeter
96.5 with a Beckman 310 multimeter.
2) Pin 30......95.8 with the radio shack meter
96.3 with the Beckman
I have read the posts regarding these checks and I have reversed the leads on
both multimeters and had the same readings. Checked out the soldering at U6,
RP4 and P3 as well. U6 seems to be seated just fine as well. They seem to be
within 10% of the recommended high end readings but just want to make sure.
Thanks
Mike
VE3WDM
Serial 06613
_________________________________________________________________
So many new options, so little time. Windows Live Messenger.
http://www.microsoft.com/windows/windowslive/messenger.aspx______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
