Would not using the menu to set tune power do this? That is what I use. I set mine for 3 watts and tune the tuner. This is a level I can adjust depending on my station needs. 3 watts gives me enough to drive my QRO 600 W amp to tune the remote tuner.
73, Bill K9YEQ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard Thorne Subject: Re: [Elecraft] K3 - Amp disable on TUNE request Your reading my mind Phil. Good idea. Rich - N5ZC Phil & Debbie Salas wrote: > I use the TUNE feature on my K3 all the time for tuning my auto-tuners (both > a MFJ-998 in the shack for some of my antennas and a CG-500 remote tuner for > my 43-foot vertical). I also use an amplifier on occasion. > > So - Could we have a set-up option that does NOT key the amplifier when you > push TUNE on the K3? This would always ensure you are only transmitting low > power when you tune your tuners without having to remember to turn your > amplifier off first. > > Phil - AD5X ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
