Are you sure that is what it is? The plug on the back of my THP HL50 and HL1.2K amplifiers ares not 5 pin 240 dins. They look almost right, but are not.
Mike Jim Spears wrote: > > I researched the 5 pin DIN connector that is on the back of the THP 1.5KFx > amp's Yaesu interface jack and have a part number. This will enable any > K3 > which has the pullup resistors for band data installed on the KIO3 through > the ALC mod or factory cut in to output band data to the amp and have it > follow band changes just like the K3 was a Yaesu transceiver. > > > > The SwitchCraft part number is: 12GM5M (presumably > series 12GM, 5 pin, male) > > The Mouser part number is: 502-12GM5M > > > > It is important to note that this is a male connector with 5 pins > distributed around 240 degrees. The more common 5 pin DIN connectors have > the 5 pins distributed around 180 degrees, these will NOT work. > > > > Wiring is straightforward from the DB15 connector to the 5 pin DIN. 4 > signals plus ground. And ALC as a separate cable for those so inclined. > > > > www.zerobeat.net/mediawiki/index.php/K3_to_Tokyo_Hy-Power_HL_1.5KFX_amplifie > r > > > > shows the wiring diagram; presumably a K3 with the pullup resistors > installed internally does not need the external 5 volt source. > > > > Jim > > N1NK > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- View this message in context: http://n2.nabble.com/K3-to-THP-1.5KFx-connector-tp2309049p2309879.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
