Ah! I must have been on an exact 5W setting when I did it, then, Joe. Thanks for clearing that up.
I still think that as it's a calibration feature, it would make better sense by being protected by the ability to turn it off. I'd really like to hear why a calibration feature sits there awaiting to pounce on the unwary. 73 DaveL G3TJP I said: > So, if I'm tuning up through, say, a Z-Match into a doublet > and power output is set to "around" 5 or 50W and press "Tune" > in order to tweak the Z-Match, the initial (off-tune) complex > impedance the K3 may see could very well cause the K3's output > power to change to 5 or 50W and because of that, power ...... Joe replied: Not quite ... If you set the power level to exactly 5.0 or 50 watts and press the Tune button the K3 will recalibrate. If you set the power to 4.9, 5.1, 49 or 51 watts it will not recalibrate. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
