If you used the equalizer you will also need to flatten the response as well. I have not used it in SSB mode. I prefer using narrower filter.
73, Bill K9YEQ K2 #35; KX1 #35; K3 #1744; mini mods -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of steven.zabarn...@notes.udayton.edu No I did not turn off compression. I will give this a try. Has anyone else tried using PSK31 with USB mode? >Did you turn compression off? > >Bob NW8L On Mon, Feb 16, 2009 at 12:12 PM, <steven.zabarn...@notes.udayton.edu> wrote: > After all this discussion of power control in DATA A mode vs SSB, I decided > to try using PSK31 with USB mode, rather than DATA A. I changed the MIC SEL > menu item to Line IN and adjusted the ALC meter to 4-5 bars using the MIC > GAIN control. The PSK31 power output appeared to closely match the K3 power > setting. Unfortunately, I received horrendous feedback about the widthand > IMD of my signal -- when I returned to DATA A mode, my signal width and IMD > returned back to acceptable values. > > Steve N9SZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html