I do PSK31 in USB and RTTY in LSB. No problems. And make sure the compressor is off. 73, Ed K3IXD K3 #1726
Date: Mon, 16 Feb 2009 14:47:32 -0500 From: [email protected] Subject: Re: [Elecraft] Using USB mode for PSK31 rather than DATA A To: [email protected] Message-ID: <ofa4af7d49.1dea48d1-on8525755f.006cb909-8525755f.006cb...@notes.udayton.edu> Content-Type: text/plain; charset=US-ASCII No I did not turn off compression. I will give this a try. Has anyone else tried using PSK31 with USB mode? > >Did you turn compression off? > > > >Bob NW8L On Mon, Feb 16, 2009 at 12:12 PM, <[email protected]> wrote: > > After all this discussion of power control in DATA A mode vs SSB, I decided > > to try using PSK31 with USB mode, rather than DATA A. I changed the MIC SEL > > menu item to Line IN and adjusted the ALC meter to 4-5 bars using the MIC > > GAIN control. The PSK31 power output appeared to closely match the K3 power > > setting. Unfortunately, I received horrendous feedback about the widthand > > IMD of my signal -- when I returned to DATA A mode, my signal width and IMD > > returned back to acceptable values. > > > > Steve N9SZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
