I would assume that when installing this board that its best that we cut the two traces on the main board so that the negative ALC mod isn't half way done right? I've got the board in hand now just need to find the time to tear the shack apart again and start up on mods again. I've done them all but this one... At some point in time the pulled up band data will prove useful so I do need to get it done... The ALC mod is just so I can say my K3 is up to snuff and the same as the newer ones.
~Brett On Wed, 2009-02-11 at 17:31 -0700, W0MU Mike Fatchett wrote: > Sorry K3. > > All I was told that this board had the pull up resistor installed. > > W0MU > > "A slip of the foot you may soon recover, but a slip of the tongue you may > never get over." Ben Franklin > -----Original Message----- > From: Terry Price [mailto:[email protected]] > Sent: Wednesday, February 11, 2009 4:55 PM > To: 'W0MU Mike Fatchett' > Subject: RE: [Elecraft] New I/O mod kit E850237 > > Is this for a K3? > > Are these active high or just pulled up? > > Terry > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of W0MU Mike Fatchett > Sent: Wednesday, February 11, 2009 6:38 PM > To: [email protected] > Subject: [Elecraft] New I/O mod kit E850237 > > For those wanting TTL outputs on the I/O board, you may now replace your old > board with a new one. $15.00 plus shipping. This is an alternative to > soldering the 2.2k resistors on the old board. > > Mike W0MU > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
