The ability to have the sub receiver on a different band is great, but I am having some problems getting it to do one thing that I had hoped it could do.
A big plus would be to be able to communicate on one band, using the VFO B for transmit and the sub-receiver for receive, and then use the main receiver IF output to view a second band on the IF connected panadapter. Since there seems to be no way to get to the sub receiver IF. (?) The only way that I can seem to get the K3 to transmit on the VFO B frequency is in split mode. If I'm in split mode and change the bands on VFO A, it drops out of split and transmit goes back to VFO A. If I try to go to split mode while on different bands, it says "split N/A." I have found a way to do it. If I start up with VFO A and B on the same band with the sub rcvr on, I can engage split mode and then manually spin the VFO A dial until I get to the second band. Even with course tuning, this takes a lot of spinning. Am I missing something here?? Regards, Joel Joel R. Hallas, W1ZR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
