Hi Andy, There was a fairly long discussion between Wayne, W0MU and myself on this subject, mostly on the reflector. The answer was no - you can't use the PR6 (as installed on the radio) inline on the 2nd receiver to monitor 6M while operating on other bands.
73, Bud N7CW -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andy GD0TEP Sent: Thursday, April 02, 2009 5:57 AM To: [email protected] Subject: [Elecraft] K3 and PR6 question Hello to the group. I must be missing something in the manual... If I use the K3 (and 2nd receiver) with the radio TX on the main, but RX on the sub receiver that is connected to the antenna via the BNC RX antenna (with the SUB indicated on the display) is the PR6 pre-amp in line with the sub receiver or not? 73 Andy http://www.gd0tep.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
