Guys, the Main-RX and TX of K3 #2878 are up and running, thanks to the hints from Markus and Chen.
But not the sub-rx. All plugs mated Checked the tmp-cables Performed the calibration No err-msgs Sub-RX in config-menu set to *yes, installed* ant = bnc no receive, only noise like there is no antenna connected, noise characteristics change with selected filter (Bandwith/shift) Faint signals from *strong* stations. Signals from my K2 sound ok when i transmit into a dummy load and receive them with the K3 sub-rx. So the sub-rx is not dead, but deaf. The K3 has sub-rx, KXV3, equal filters ssb/cw on both rx's , *no* KAT3. Where to begin the troubleshooting? Martin -- 73, DM4iM K2 #2706 , K3 #2878 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
