What about roofing filters? Are they defined well and in correct slots? I remember when I put filter to slot #5 instead of #1 and no signal from KRX3. Just idea what to check...
gl 73! Lexa, ok1dst DM4iM napsal(a): > Guys, thank you for all the input. > Here's the setup > > Config: KRX3 Ant=bnc ( I have no ATU) > > 2-way antenna switch, 1st. cable to ANT1, 2nd cable to AUX > > A: Switch in position ANT1 and MAIN selected: Main RX ok, sub rx a *lot* > weaker. > > B: Switch in position AUX and AUX selected: sub-rx a little better than > before due to the 3-db increase because the antenna now is not shared > with main rx. > > C: I also hooked the 2nd cable to RX-IN and selected RX-Ant, but same > performance as B. > > What am i missing? > > > Martin > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
