Chuck, I don't recall the exact release timing, RF will always cease *before* the drop of KEYOUT , so the amp relay should still be engaged when RF ceases. That is true for both PTT and QSK. Unless you can create a relay that drops out before its coil voltage is removed, I cannot ever see a problem here.
73, Don W3FPR ni0c wrote: > N6KR wrote: > > "If you switch the amp using PTT, you can adjust the delay from end of > RF to PTT release. See the CONFIG:PTT RLS menu entry." > > > According to the latest manual I have downloaded (Rev. D2), PTT RLS has > "no effect" in the CW mode. > > If this has been changed, it is cause for celebration. The lack of detailed > information on a PTT "tail" time similar to that provided by the K1EL WinKey > is the main reason that I use the latter to key my K3 and (non-QSK) > amplifier, rather than using the K3's internal keyer. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
