John Gaynard wrote:
> Am I correct in thinking that you cannot be/should not be in
> SEMI mode unless VOX is turned on. I am on firmware level 2.38. Without
> VOX or QSK turned on, you should not be able to put the rig in transmit
> mode
> by touching the key.
>
You CAN transmit by touching the key...IF your keyer has a PTT connection to
the K3. I was tripped up by this yesterday while testing a new firmware
release. I had forgotten I had connected my Winkeyer's PTT1 output to the
K3 PTT In on the rear panel. I always have my foot switch connected via the
front panel MIC connector using the Heil AD-1K adapter, but I had forgotten
about the rear panel connection. This was with CONFIG PTT-KEY: OFF-OFF.
73, Bill W4ZV
P.S. I believe Nabble has now fixed their quoted text attribution
problems...we'll see if this post goes through correctly!
--
View this message in context:
http://n2.nabble.com/CW-and-VOX-tp2667264p2669899.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
