Mike Harris-9 wrote: > > G'day, > > Tried using my KUSB today. Loaded latest driver and all communicates well > between K3 Utility and K3. I modified the power on banner OK. > > Changed the com port in Logger32 to the same and after the first read of > frequency Logger32 freezes and needs the three finger salute. CPU seems > to be running at 100% > > K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com > port in Logger32 and it freezes. > > KUSB plugged into any USB port on the PC not via a hub. > > Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. > > Anyone else seen this? > >
Not specifically. However, I believe the KUSB uses the Prolific PL2303 chipset, and I have had problems with other adapters using this chipset which were not experienced when using a real serial port. I obtained a USB adapter using an FTDI chipset which a retailer claimed was "more reliable" than the Prolific chipset and have not so far experienced any problems with it. ----- Julian, G4ILO. K2 #392 K3 #222. http://www.g4ilo.com/ G4ILO's Shack http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 http://www.wota.org.uk/ Wainwrights On The Air -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2966753.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
