Mike, I have been using Logger32 for about 10 years and have had virtually no issues. I currently have 3 USB to serial adapters running on my PC, one for the Yaesu and two connected to the K-3, one for reading the data from the radio into Logger32, the other for the Logger32 CW keyer. At this moment CPU usage is running 2-7% with both Logger32 running and LP-Bridge running. PC is running XP and is a dual core Intel machine. Hope this helps.
Mike -N5WNG Mike Harris-9 wrote: > > G'day, > > Tried using my KUSB today. Loaded latest driver and all communicates well > between K3 Utility and K3. I modified the power on banner OK. > > Changed the com port in Logger32 to the same and after the first read of > frequency Logger32 freezes and needs the three finger salute. CPU seems > to be running at 100% > > K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com > port in Logger32 and it freezes. > > KUSB plugged into any USB port on the PC not via a hub. > > Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. > > Anyone else seen this? > > Regards, > > Mike VP8NO > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2969289.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
