Phil, Solder some wires to the terminals of D12 inside the K2 (the cathode is positive 12 volts and turns off with the K2 switch). Make a small notch in the rear panel above the coaxial power jack sufficiently large to run the wires through would be my preferred routing for the wire, but make your own choices on the routing..
73, Don W3FPR Phil Kane wrote: > On 5/27/2009 10:24 AM, Ron D'Eau Claire wrote: > > >> I have used a 4" square muffin fan sitting in rubber feet on top >> of the K2 running at a slow speed, not to keep it any cooler but >> to avoid the noisy little fan on the back from running. >> > > How are you feeding power to the fan? I have one on top, but > it runs from a separate connection to the line that feeds the > K2, so it runs even when the front panel switch is turned > "off". I have to open the breaker that feeds the K2, the > KAT100, and the Rigrunner Plus as well as the fan to stop the > fan if I am not running the radio. I would really like to have > the fun turned on and off with the K2. > > -- 73 de K2ASP - Phil Kane > Elecraft K2/100 s/n 5402 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
