Appreciated... I've been off the reflector for a bit and just haven't been paying very close attention... Glad to hear there are no unforseen issues with that...
On Mon, 2009-06-15 at 04:31 +0100, David Ferrington, M0XDF wrote: > lots of people have done that. > 73 de M0XDF, K3 #174 > -- > Power is no substitute for Skill. > > On 15 Jun 2009, at 01:06, Brett Howard wrote: > > > I think for most normal operations I want to use the KAT3 port for the > > Aux antenna jack for my KRX3 but I'd like to have the option of using > > the AUX RF port without too much hassle. Does anyone see any reason > > why > > one would have any problems mounting the BNC jack and routing it and > > the > > other TMP cable (connected to the KAT3) together then just tape off > > the > > one that I'm not using and let it float in there. I could even > > throw a > > connector with a short on the AUX RF connector when its not in use to > > make sure and completely ground out the floating cable (not sure that > > would really be needed but couldn't hurt right?) > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
