It's my understanding the screws are in *separate* envelopes in with the other hardware, which I why I wrote the note that way.
Thanks, Joe. I'll check with the people pulling the parts for the kits. Ron AC7AC -----Original Message----- From: Joe Subich, W4TV [mailto:[email protected]] Sent: Wednesday, June 24, 2009 8:54 AM To: 'Ron D'Eau Claire'; 'Robert 'RC' Conley'; [email protected] Subject: RE: [Elecraft] 2-56 pan heads If I recall correctly the "missing" 2-56 pan head screws (used in the front panel board assembly - pg 24) are packed with 2-56 screws that are used for the VFO A trim panel (page 31). Unfortunately, if the user sets aside the separate envelope with trim panel hardware until it is time to install the trip panel (to prevent loss of the 2-56 hardware), he will not find the "missing" 2-56 hardware when needed to attach the spacers to the front panel circuit board. I had that problem with my K3 .... and this is the fourth or fifth report of the same problem here. The assembly manual needs an explicit statement on page 24 indicating where to find those screws. 73, ... Joe, W4TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
