Karl, Did you cut the correct traces? You should read "infinity" on your meter after the cut, and not "0". Measure across each cut - one probe on one side of the cut and the other probe on the other side of the cut.
73, Don W3FPR KARL MARDERIAN wrote: > First off I ran across some people taking about Head Phones and the > K3. If I what use a Mono pair of phones, I like the Kenwood HS-5 8 > Ohms. They are well mad and sound good. But I regress, at the end of > replace KI03, one is told to cut both traces on the RF board, from the > bottom of the radio. They state if cut properly, you should read "0" > ohms on your meter. Well, I got reads of between 12-14 ohms. Is there > not all kinds of electric stuff on the other side of the board for the > circuit to follow. My mag glass works just fine to show I cut the > copper out the PC board. Just so you known > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
