Allan, Do you have the connector from the K2 AUX IO connector to the KAT100 Control input DB-9 connector in place? This is required for the KAT100 to communicate with the K2.
If you do have the connector in place, then you have a problem either with the KAT100 or the K2/100 control lines that communicate with the KAT100. 73, Don W3FPR Allan Taylor wrote: > Folks of the reflector: > > I have K2 S/N 755 purchased last fall from WA7BOC. It works great, has > the 100W amp, etc. > This last spring I purchased a KAT-100 from a fellow on this > reflector. I have forgotten his call. At the time, > I did not have time... to try it out. I finally had an opportunity and > ... nothing happens.No lights come on (although I know power is on > the connector). Hitting 'Tune' shows no response from the tuner, etc. > > I built a K2 (S/N 157) long ago, but have no pretense of being up to > date on the innards of a K2/100 or of the KAT-100. Could some patient > soul out there help me through this process? I may have to contact > Aptos... > but I rather hope not. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
