Cookie, The LEDs are the ones on the Shift, Width, etc. knobs; they become extremely bright when "LCD Brt" (display backlight) is set to "dAY" (or off), and there is no way to adjust them because "LED Brt" is no longer functional (it just beeps when you spin the vfo). Only when "LCD Brt" is set at some value 1 to 8 can "LED Brt" be adjusted.
I checked the above text about five times for proper use of LED vs LCD... it can get a little confusing, hahah Anyhow, I'd like to use the LCD "day" setting and also be able to adjust the LED brightness down. 73, Drew AF2Z On Wed, 15 Jul 2009 09:58:49 -0700 (PDT), you wrote: > >It appears to me that the LCDs have only one brightness, none! Only the back >light has brightness. When set to DAY the back light is off and the contrast >is just from the reflection on the back plane versus opaque for the activated >elements. I didn't know there was a Day setting until your post even after a >few thousand contacts over the past year. > >Willis 'Cookie' Cooke >K5EWJ > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
