Thank you. I've sent your problem report off to the fldigi development list. Leigh/WA5ZNU > The problem seems to be that I am using the Virtual Serial Port Emulator > software to allow multiple programs such as KTune and KComm to control the > K3 at the same time as Fldigi. Something has changed in the latest version > of Fldigi so that it will no longer work with VSPE. Not even Hamlib will > work with the virtual port, even if I close down all the other programs that > were using it. If I close VSPE and set up Fldigi to use the real serial port > then it works with either RigCAT or Hamlib. > > This is probably of interest to anyone who uses KTune and/or KComm as I > describe using VSPE to allow two or more programs to control the radio on my > website. With Fldigi 3.12 you can't do that. I don't know if it is a matter > of configuring VSPE differently or whether there is any other workaround, > but that seems to be the situation at the moment. :( > > ----- > Julian, G4ILO. K2 #392 K3 #222. > * G4ILO's Shack - http://www.g4ilo.com > * KComm - http://www.g4ilo.com/kcomm.html > * KTune - http://www.g4ilo.com/ktune.html > >
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
