Merv .... You didn't say if you are using a PC or not .... With a PC, you can do this by clicking on DX spots and use a program that recognizes QSX in the spot. You might have to put out a spot to get them both on the screen.
Otherwise ..... With no PC, and probably a better way to do it .... Put VFO A 14025, VFO B 14027, CW, set your filter for each VFO if needed, SPLIT on and enter that into a memory location with M>V and M1 Then put VFO A 14195, VFO B 14200, SSB, set your filter for each VFO if needed, SPLIT on and enter that into M2 with M>V Now V>M M1 and you are on the CW pileup And V>M M2 and you are on the SSB pileup But ..... In the heat of switching back and forth you must be VERY careful to use the V>M button - do not miss and use the V>M button because you will end up losing one of the memories and have two memories the same. There is no safeguard on V>M ..... That is supposedly "on the list" to have a double tap of the V>M before it writes to the memory location, but there are too many other things ahead of it, I guess. 73 Hank K8DD Merv Schweigert wrote: > Color me stupid, but I have not come up with a way to change > bands / modes on a band efficiently, I am sure someone has > or does this all the time, would appreciate some input. > Read before answering because I do know how to change bands > and modes, but not in the fashion I would like to. > > Example: single receiver. > > VFO A = 14025 Split with VFO B 14027 > > I wish to go to another DX pileup on SSB > > VFO A= 14.195 split with VFO B = 14200 > > And switch back and forth to monitor/ call either > freq to work the DX. > > > How can this be done simply to swap between those two modes > and freq sets? > If I use the Band button I can go between bands to monitor > a pile up on another band, how do you do this on one band? > Also needs to remember the freq you are using, IE: if you > tuned the split to 14205, and switch to CW, when you come > back to SSB needs to be the last freq you used. > > This is easy peaszy on all my other radios using band stacking, > its just a press of the 14mhz band button, once for the CW > and once for SSB, and they remember the last tuned freq. > Seems I am missing something easy here on the K3? > Thanks 73 Merv KH7C > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
