So long as they remember to keep rapid tune via the RIT knob function set to not round off the frequency (VFO OFS menu item), this can lead to the accidentally loss of a contact on CW.
73 Dave, G4AON K3/100 #80 ---------------------- Another thing it does and that I suggested for the K3 is this: With both RIT and XIT "Off" change the function to force the frequency to the nearest whole number value on the first step. For example if the current frequency is 14.201 MHz and the coarse tuning steps are 5 KHz, then the first step would be to either 14.200 or 14.205 (depending on direction) then the following steps would be to 14.210, 14.215... if tuning up or 14.195, 14.190...if tuning down. On Dec 17, 2008 Richard, AD7FZ, wrote: "Hello Wes, yes this is a good idea. I've sent your request off to our software engineers to work on." Somewhere is a disconnect. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
