For me the nervous part was injecting enough signal into the RX port to activate the new feature! Not every day you dump a full watt into the rig.
~Brett On Sat, 2009-08-22 at 01:35 -0400, James Sarte wrote: > Thanks to all who gave me suggestions on soldering. > > Was able to perform the Extreme Signal RX mod without a hitch tonight. > Tested the radio, and all is well. Only nervous part was soldering the > hookup wire to R56. I was afraid I'd loosen it. I kept my iron at 364*C > though and made sure contact was quick with R56; just long enough to tack > the wire in place. > > Now just waiting for the noisy VFO kit to arrive so I can solder those > resistor/diode pairs into the RF board. BTW, none of the vias on my board > had solder in them which made life pretty easy. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
