Mike, Using the ACC connector will not help a lot - there are no audio signals there, so the only applicable input at the ACC connector would be PTT IN. It would seem just as easy to use the PTT RCA jack on the K3 because you would be connecting to the LINE IN and LINE OUT for audio. The LINE OUT is pre-AF gain, you set the level using CONFIG: LIN OUT in the menu.
73, Don W3FPR Michael M. Raskin wrote: > Anyone using this combo with the ACC (15-pin) instead of the mic jack? DX > Engineering, and well as TigerTronics, sell all kinds of pre-made cables but > only a mic cable for the K3. I'd rather connect to the ACC, as I do with the > IC-7800, where the audio signal is not dependent on the AF volume or mic gain > settings. > > Mike, W4UM > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
