this works great. this is how I did it and it works great Lee K0WA
The New Kansas QSO Party - August 29, Sat 9am-9pm and August 30 Sun 9am-3pm CDT More Info at: http://www.ksqsoparty.org/ In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? ________________________________ From: Don Wilhelm <[email protected]> To: Michael M. Raskin <[email protected]> Cc: [email protected] Sent: Monday, August 24, 2009 5:46:44 PM Subject: Re: [Elecraft] K3 and SignaLink USB Interface Mike, Using the ACC connector will not help a lot - there are no audio signals there, so the only applicable input at the ACC connector would be PTT IN. It would seem just as easy to use the PTT RCA jack on the K3 because you would be connecting to the LINE IN and LINE OUT for audio. The LINE OUT is pre-AF gain, you set the level using CONFIG: LIN OUT in the menu. 73, Don W3FPR Michael M. Raskin wrote: > Anyone using this combo with the ACC (15-pin) instead of the mic jack? DX > Engineering, and well as TigerTronics, sell all kinds of pre-made cables but > only a mic cable for the K3. I'd rather connect to the ACC, as I do with the > IC-7800, where the audio signal is not dependent on the AF volume or mic gain > settings. > > Mike, W4UM > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
