On Sun, 30 Aug 2009 14:29:32 -0700, Joe Planisky <[email protected]> wrote:
If you want both Receivers to have the same settings, just double tap the A>B button. That will transfer ALL of you settings to the SUB receiver. All of this is described in the manuals that apply. In fact you will see the B VFO display A->B ALL for a short time. It will also turn both NBs. Tom, N5GE [email protected] K3 #806, K3 #1055, PR6, XV144, XV432, KRC2, W1 and other small kits. http://www.n5ge.com http://www.swotrc.net >Hi Paul, > >I just got stumped by this, too. In order to turn the sub RX NB on >and off independently of the main RX, you have to set CONFIG:VFO >IND=Yes. This allows the main and sub RX to be on different bands (so >pay attention when changing bands!) If CONFIG:VFO IND=No, the sub RX >NB is supposed to follow the setting of the main RX. At least that >what I *think* the intent is. It's mentioned in the release notes for >FW 3.03. > >However, that said, I don't think it's working right. When I have >CONFIG:VFO IND=No and turn on the NB, it's quite clear from the sound >that the sub RX NB is NOT turning on. When I have the main and sub RX >set to share the main antenna and turn on the NB, I hear the noise >disappear from the main RX side, but it's still there in the sub RX >side. > >Can anyone else try this and confirm whether it's working as expected >with CONFIG:VFO IND=No? > >73 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
