Ron, The K2 has no provision for aural monitoring of digital mode audio. You can get that from your computer speakers if you want to hear it. BUT - that is only for inbound audio, and has nothing to do with the transmitted signal. The advice of others to use an IMD meter is a good one.
If you wish tohear the received audio in the speaker while sending audio to the compter soundcard, there is a way, and it involves adding a fixed audio output to the K2 that can be used to drive the soundcard - that leaves the AF gain control as normal while providing a fixed audio level to the soundcard. See my website www.w3fpr.com for more information. Tom Hammond is currently providing board for this fixed audio addition to the K2, but his supply is running short - for information about the boards, go to www.n0ss.net and look in the K2 related file section. 73, Don W3FPR KM4VX wrote: > I have searched the archives but cannot find anything concerning how to > monitor the outgoing PSK31 signal from the K2. In the PRO3 one just pushes > the "Monitor" button. I am using the SignaLink USB interface with Digipan > software at 5 watts. I would like to check my outgoing audio. Thanks. Ron > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
