Hi, n6xvt Karl. 1 is the cable from radio to dummy load good? 2 is the dummy load any good? 73 n6xvt Sent from my iPhone
On Sep 22, 2009, at 6:41 PM, W4HDM <[email protected]> wrote: > > My KAT100 was working fine then developed a problem recently. > For those wondering what happened to my for sale listing this is why I > removed it. > > At first the tune sequence would tune at times and other times it > would stay > at 9.9-1 and the lights would work most of the time. (Using a dummy > load as > well as an antenna) > > I checked the solder connections in the KAT100 and retouched a few. I > noticed no change in behavior. I put the radio away for a few days and > revisited the problem today .... > > Before doing anything I did a SWR Bridge alignment on the KPA100 > just to be > sure nothing had changed. I adjusted for 0 voltage using a DMM as > instructed > in the manual. > > Currently, the tune sequence gives a 1.0-1 reading on the K2 meter > but the > scale lights on the KAT100 do not light up while tuning or when > keying. The > antenna and power lights are working properly. > > When keying 100 watts into a dummy load the power is reduced by > various > amounts depending on the band and the K2 shows HI Refl, the same > symptoms > using an antenna. > > Using the menu for tuner readings, after hitting tune in the dummy > load, I > get: > > L00.4 > C0.08 > nET2 > t 197 > E243 > Init > F1.05 > L0-L8 get relay clicks as well as > C0-C8 and > N1-N2 > > I am using the The KAT100/KPA100 in their own enclosure. > > Any help on where I should start from here to solve the problem? > > Thanks, > Damon > > (Don .. I sent you an email on this when the symptoms first started, > maybe > it was lost in SPAM) > > > ----- > W4HDM-DAMON-K2#473 > > > -- > View this message in context: > http://n2.nabble.com/KAT100-error-tp3696887p3696887.html > Sent from the [K2] mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
