Hi Karl, Yes, both check out fine with my MFJ-269
Thanks for the suggestion. KARL MARDERIAN wrote: > > Hi, n6xvt Karl. > 1 is the cable from radio to dummy load good? > 2 is the dummy load any good? > 73 n6xvt > Sent from my iPhone > > On Sep 22, 2009, at 6:41 PM, W4HDM <[email protected]> wrote: > >> >> My KAT100 was working fine then developed a problem recently. >> For those wondering what happened to my for sale listing this is why I >> removed it. >> >> At first the tune sequence would tune at times and other times it >> would stay >> at 9.9-1 and the lights would work most of the time. (Using a dummy >> load as >> well as an antenna) >> >> I checked the solder connections in the KAT100 and retouched a few. I >> noticed no change in behavior. I put the radio away for a few days and >> revisited the problem today .... >> >> Before doing anything I did a SWR Bridge alignment on the KPA100 >> just to be >> sure nothing had changed. I adjusted for 0 voltage using a DMM as >> instructed >> in the manual. >> >> Currently, the tune sequence gives a 1.0-1 reading on the K2 meter >> but the >> scale lights on the KAT100 do not light up while tuning or when >> keying. The >> antenna and power lights are working properly. >> >> When keying 100 watts into a dummy load the power is reduced by >> various >> amounts depending on the band and the K2 shows HI Refl, the same >> symptoms >> using an antenna. >> >> Using the menu for tuner readings, after hitting tune in the dummy >> load, I >> get: >> >> L00.4 >> C0.08 >> nET2 >> t 197 >> E243 >> Init >> F1.05 >> L0-L8 get relay clicks as well as >> C0-C8 and >> N1-N2 >> >> I am using the The KAT100/KPA100 in their own enclosure. >> >> Any help on where I should start from here to solve the problem? >> >> Thanks, >> Damon >> >> (Don .. I sent you an email on this when the symptoms first started, >> maybe >> it was lost in SPAM) >> >> >> ----- >> W4HDM-DAMON-K2#473 >> >> >> -- >> View this message in context: >> http://n2.nabble.com/KAT100-error-tp3696887p3696887.html >> Sent from the [K2] mailing list archive at Nabble.com. >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ----- W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3705656.html Sent from the [K2] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
