I have a K2 with a KPA100 and KAT100 in a separate enclosure. It had been working on my lossey loop but I decided to try a ground mounted Hi-Q 4/160. After connecting the antenna, I began trying to tune to the various bands. It seemed to be tuning to a low SWR when the control panel just froze up. The VFO would not change the freq and none of the buttons functioned. I turned it off and on several times and came up with the full elecraft in the LCD and then the last freq I was on. The control panel was still frozen. I then tried to reset. That did not work. Now it just goes through the POST (full elecraft in the LCD) and seems to go into transmit (dummy load connected) with a high pitched tone and hangs there. Any suggestions would be greatly appreciated. 73, Chris Amyes, K7CJA -- View this message in context: http://n2.nabble.com/K2-CONTROL-PANNEL-FREEZE-UP-K7CJA-tp3749758p3749758.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
