Tke the amp out of the equation and see if you still have the issue. Try a different antenna and check the SWR. I would suspect one of those to be the issue. At least it will eliminate some variables.
Dan AB3EN Toni Lindén wrote: > > Hi! > > I was trying K3 for first time in SAC contest a couple of weeks ago. > > During the contest I got multiple reports that besides of my run > frequency, I also had other reasonable strong signals "around the > band". > > It cleared out that I had at least one other signal about 7kHz away > from my actual freq. It was quite strong, maybe 40dBs down from my > running freq. > > Have anyone else had similar problems and do you have any suggestion > how to fix this? > > I was using only about 60 to 70 watts drive for the amp and amp was > not pushed over. The same appears on both, CW and SSB. Radio has the > most resent FWs available via K3 utility SW. > > I'm planning to take K3 with me to CU2 for CQWW, but after getting > such a bad reports about "my 2nd pileup" on the same band, I'm not > sure if I'm willing to make such an interference to others on CQWW... > > So if anyone has any advice, I'm more than pleased to hear! > > > 73 de Toni, OH2UA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ----- Dan AB3EN -- View this message in context: http://n2.nabble.com/K3-bad-TX-tp3763859p3763877.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
