G'day, Just checked here. At 14020kHz and 14120kHz the spur remained approx 6.33kHz away.
Regards, Mike VP8NO ----- Original Message ----- From: "Geoffrey Mackenzie-Kennedy" <[email protected]> To: "Toni Lindén" <[email protected]> Cc: "Elecraft Discussion List" <[email protected]> Sent: Sunday, October 04, 2009 11:25 AM Subject: Re: [Elecraft] K3 bad TX Toni, Do I understand correctly that the transmitter spur is always about 7 kHz away from your actual frequency, regardless of what your actual frequency might be? Or does the spacing change when you change the actual frequency by say 10 kHz? 73, Geoff GM4ESD Toni Lindén wrote: > Hi! > > I was trying K3 for first time in SAC contest a couple of weeks > ago. > > During the contest I got multiple reports that besides of my run > frequency, I also had other reasonable strong signals "around the > band". > > It cleared out that I had at least one other signal about 7kHz > away > from my actual freq. It was quite strong, maybe 40dBs down from my > running freq. > > Have anyone else had similar problems and do you have any > suggestion > how to fix this? > > I was using only about 60 to 70 watts drive for the amp and amp > was > not pushed over. The same appears on both, CW and SSB. Radio has > the > most resent FWs available via K3 utility SW. > > I'm planning to take K3 with me to CU2 for CQWW, but after getting > such a bad reports about "my 2nd pileup" on the same band, I'm not > sure if I'm willing to make such an interference to others on > CQWW... > > So if anyone has any advice, I'm more than pleased to hear! > > > 73 de Toni, OH2UA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
