Len, K3LJ wrote: > Dick, I tried it with my K3 #892 with no problems during TX Test. I am > running the latest Beta version of HRD. I have no problems using HRD to do > CW or using the built in keyer in the K3. The mistakes that I make using the > keyer are mine but nothing out of the ordinary other than that. > > Len, K3LJ > > > > Dick Roth KA1OZ wrote: >> Greetings-- >> >> I discovered tonight, having downloaded and installed 3.41 a few nights >> ago, that when connected to HRD, my K3, #859, has problems with the >> keying circuit, regardless if I'm using my paddle or my straight key. >> >> While in TX Test mode, when connected to HRD, dits and dahs become >> "spasmodic" with dahs occasionally elongated or cut off short. The dits >> will occasionally "miss"...not be there when expected. >> >> When disconnected from HRD, normal operation resumes. Now, I only tried >> this on TX Test and not into the air or dummy load. >> >> When I reverted back to 3.30, the problem vanished...ceased to exist, >> connected to HRD or not. >> >> Has anyone else discovered this? >> >>> >[snip] > >
I'm running HRD 4.1 Build 2312. I should add that the radio is as it was when I put it together. I have not made any mods. I don't know if this is pertinent or not. -- 73, Dick ka1oz Middleborough, MA Radio: Elecraft K3/100(Kit) SN 859 Antenna: Titan-DX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
