Dave, Thanks for the suggestion. I'm using a level of "8" ---the manual recommends no more than 10. In sideband I get a good level to the programs I mentioned. In data modes there is absolutely nothing showing on the programs displays. It's like there is absolutely no output from the Line Out on the K3.
Have a good day and 73. Jim, W0EM Date: Fri, 16 Oct 2009 11:19:16 +0800 Subject: Re: [Elecraft] K3 Line Out in Data Mode? From: [email protected] To: [email protected] CC: [email protected] check your line out setting, maybe you set too low... 73 de ba4rf/Dave On Fri, Oct 16, 2009 at 10:40 AM, Jim Harris <[email protected]> wrote: Hi, I've been able to transmit and receive PSK and RTTY in USB & LSB on my new K3. That includes sound out of the Line Out on the rear panel to my computer's sound card. However, in all data modes there is no sound from Line Out to the computer. I've used MMTTY, MMVARI and Hamscope with the same results. I've read everything related in the operators manual without finding anything that will help. Looking for working ideas. Thanks, have a good day and 73. Jim, W0EM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
