Thanks, Michael - Since I don't have the SUB RX, and B is always the xmit VFO, I'm not sure why B SET even works, except maybe for modes.
I had the same scenario as you, and it took me longer to figure out! I dunno how the mode got set differently on B. The double tap is a good tip. Mike K2MK wrote: > Hi Mike: > > I have a SUB RX so it is possible that my comments below might not fully > apply if you don't have a SUB RX. > > VFO A and B can be on separate modes. When you hold the A/B (1) button > you'll see b SET on the top display. From there you can change modes, fiddle > with filters, preamp, NR, etc.. The settings for VFO B can therefore be > totally different than VFO A. Some things that you can't change will say N/A > when you try to change them. > > However, if you want to avoid being in a different mode I would suggest > pressing the A-B (3) button twice. The first press copies the frequency from > A to B. The second press forces all of your selections in VFO B to mirror > VFO A. I always do this before going into SPLIT. The annoying scenario I > experienced before I learned to double press was when I was on CW and > pressed split. I reached for my paddle but nothing transmitted. It turned > out that VFO B was in the DATA mode. It took me a minute or two to figure > out what was wrong. > > > > >> Is it possible to have A and B VFO's on different modes? (no sub) If so, >> what controls the B mode? >> >> How about having the B VFO automagically go to the same band as A, when >> entering split ? >> >> Thanks, >> Mike NF4L >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
