That message says the K2 is not producing sufficient power to complete the TUNE. Do you have power out of the K2? Set the ATU menu to CALP and connect a dummy load. If the K2 power is set at the extreme low power settings, that may not be enough to do a TUNE. Turn the power upto 2 watts or more and try a TUNE again.
73, Don W3FPR KM4VX wrote: > My AT has suddenly started showing "LO PO" after displaying the SWR on all > bands when the TUNE button is pressed. I have the AT set to "AUTO" and even > when manually increasing the power I still get the "LO PO" display after the > K2 displays the SWR. Changing antennas has no effect. Ths is K2 serial > number 6255 which otherwise seems to be working fine. Welcome any ideas. > Thanks. > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.422 / Virus Database: 270.14.22/2446 - Release Date: 10/19/09 > 14:33:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
