I'd be interested in getting a copy of this one to play with... ~Brett
On Mon, 2009-10-26 at 20:00 -0700, Wayne Burdick wrote: > Normally, main RX audio is heard in the left channel, and sub in the > right. Now, using the CONFIG:MIX menu entry, you can put main RX audio > in both channels while leaving sub audio in only one (or vice-versa; > or even put both receivers in both channels). > > Some of you may be doing this already using a direct DSP command from > K3 Utility. The menu entry is more convenient, and it's "sticky" -- > i.e., it is set up automatically whenever you turn on the sub receiver. > > "Mixing" main/sub audio on one side or the other is useful if you're > focusing more on the signal from one receiver. Another benefit is that > AFX (audio effects) can be used even while the sub receiver is turned > on. This is because AFX, if turned on, will apply to receiver audio > routed to both left and right audio channels. > > We could use additional testers for this feature. If you're > interested, please email me directly (n6kr at elecraft dot com). > > 73, > Wayne > N6KR > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
