It works fine on the K2, also. If you direct-connect ladderline in
this way, you can get unbalanced currents on the feedline, which may
distort the antenna pattern some but otherwise work fine as well.
The KAT2 is one of the nicest K2 modules., both to build and to use.
Peter N8MHD
On Thu, Oct 29, 2009 at 4:02 PM, Nick Garner <[email protected]> wrote:
> Howdy Folks,
> I usually run my KX1 like this <http://n3wg.com/kx1.jpg>, with wire straight
> off the antenna connector using the internal tuner. I've had my K2 for
> about 8 years now and I'd like to add the internal tuner. Is anyone running
> wire straight off the KAT2 antenna connectors when portable or can you see
> any problems with doing this with the KAT2?
>
> Thank you and 73,
> Nick
> N3WG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
