Barry, My K3 Utility runs successfully at 38400 baud. Try a faster setting.
73, Don W3FPR Barry Simpson wrote: > I just downloaded the latest K3 Utility and Beta Firmware. Although the > downloads were successful, the K3 would no longer talk to my logging program > (Turbolog 4). > > > > At first I thought the problem was related to the new firmware but after > reloading an older version with the same result, I guessed, correctly, that > the new K3 Utility was the issue. > > > > My logging program was set at 4800 baud for the K3 previously whereas I > discovered that the new K3 Utility runs at 9600 baud. I did a quick edit of > the K3 parameters in the logging program and all is fine again. > > > > This may be of interest to anyone who is having similar problems. > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
