What operating system are you using Barry? I have been having similar problems with XMlog. I am using Windows 7 and the USB cable with the Prolific chip and driver. My computer is a HP Pavilion with 8 Gig RAM and the AMD processor. Willis 'Cookie' Cooke K5EWJ
________________________________ From: Barry Simpson <[email protected]> To: [email protected] Sent: Thu, November 12, 2009 9:35:41 PM Subject: [Elecraft] K3 Utility I just downloaded the latest K3 Utility and Beta Firmware. Although the downloads were successful, the K3 would no longer talk to my logging program (Turbolog 4). At first I thought the problem was related to the new firmware but after reloading an older version with the same result, I guessed, correctly, that the new K3 Utility was the issue. My logging program was set at 4800 baud for the K3 previously whereas I discovered that the new K3 Utility runs at 9600 baud. I did a quick edit of the K3 parameters in the logging program and all is fine again. This may be of interest to anyone who is having similar problems. 73 Barry Simpson VK2BJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
