I have contacted Elecraft support to see what they have to say. My radio has no internal tuner and I move the coax from device to device so there is no difference in connections or coax lengths. The coax goes straight out to the antenna which is a ground mounted vertical fed at the base with an SGC autotuner. On all three bands the SWR readings are very close and low on the K3, the Icom and Palstar analyzer both read about .5 higher and match closely to each other. Larry N0SA
Hi, Do you have the internal antenna tuner option installed? AB2TC - Knut N0SA wrote: I just noticed that the SWR meter readings on my K3 do not match my IC-7000 or my Palstar antenna analyzer. The Icom and the Palstar both read the same but the K3 reads lower. The K3 reads 1.0:1 the others read 1.5:1. Is there an adjustment for the K3, or am I just being too critical here? Larry N0SA _____ View message @ http://n2.nabble.com/K3-SWR-meter-adjustment-tp4128304p4128755.html To unsubscribe from K3: SWR meter adjustment, click < (link removed) xMjgzMDR8LTE5ODM3MTAxMjA=> here. -- View this message in context: http://n2.nabble.com/K3-SWR-meter-adjustment-tp4128304p4129320.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
