Hi James, As far as the noise when you turn shift/width, yes, I hear it too. I assume it's the result of changing the DSP filter parameters. If done while it's processing a strong signal it seems there's bound to be some artifacts. I don't know if anything can be done to quiet them. I personally don't consider it a problem, but others might object to it.
As for the shift/width not altering the sub-RX settings unless you're in B-set, I think that's normal unless you're in diversity mode. As for the different feel of the encoders, I can't comment. Haven't had to replace mine. 73 -- Joe KB8AP On Dec 7, 2009, at 4:54 PM, James Sarte wrote: > > On Sat, Dec 5, 2009 at 11:18 PM, James Sarte <[email protected]> > wrote: > >> whenever I turn the filter shift or >> width knobs now, I get a fairly loud encoder pulse noise. [snip] >> Also, when switching over to the sub receiver, rotating the width/ >> shift >> knobs don't have an effect unless I enter the B-set menu. >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
